TP-Link VB433v - Setting up QOS via the TP-Link Web Portal
For services with different network quality, different network priorities and traffic proportion can be configured. With limited bandwidth resources, the QoS module displays quality at its time and allocates bandwidth for various devices connected to this router to provide end-to-end service quality assurance.
QoS allows you to specify the priority of traffic and minimize the impact of network congestion.
Configure QoS related indicators and classify different devices into different QoS priorities.
1) Connect your device (Laptop/PC/Mobile) to your Modem Router using Wi-Fi
Locate the SSID and Wi-Fi Pin/Password on the bottom of the device. Use these details to locate the Wi-Fi name on your computer and then join the network.
When you successfully join the network, it will says “No Internet, Secured”. This means your device is connected to the Modem Router’s Wi-Fi network but there is no internet connection as the device has not been set-up/configured.
2) Open a web Browser > enter https://192.168.1.1 or https://tplinkmodem.net
- When tplinkmodem.net or 192.168.1.1 is entered in the browser, it will load a pop up window.
- Trust the pop up window, and proceed to the login page.
When prompted for Username and Password, enter the username and password that you had provided during the initial router set up.
- Provide an Upload Bandwidth
- If required you can enable QOS to IPTV and VOIP
- Click the Advanced Toggle to set the priority index.